The MK Edit/SmartArc Weld Editor Program is the PC/Laptop based weld procedure editor for MK Orbital Power Supplies. Download Here: Version 2.3

 

Benefits for the ACL:

Allows weld procedure development, editing and conversion (i.e., ACL to CobraTIG, time to degree) by using the PC/Laptop instead of using the CobraTIG or ACL.

 

Benefits for the CobraTIG:

In addition to the above benefits, it also allows firmware updates and procedure downloads to CobraTIG.

As the Firmware for the CobraTig units has expanded, so has the usability and compatibility of the MK Edit program.

 

Note:

	Version 2.3 is required for newer CobraTig 150 welders with AMD Flash memory.
	Version 2.3 is required to upgrade the firmware (see above) using a USB Port connection ONLY.

Before attempting to upgrade firmware using a USB connection, please reference the USB to Serial Port Adapter Configuration Information Sheet.