Aircrafter™ T-25 turntable and Aircrafter™T-200 turntable
The T-25 turntable is suitable for welding small intricate fabrications, tube flanges and small aircraft-type parts as well as rotating lightweight non-welding items.
T-200 turntable is recommended for medium to large weld sub-assemblies. Complete with ID purge through the center shaft, the T-200 is ideal for tube and pipe up to the rated load capacities.
Features
Appropriate for GMAW or GTAW welding processes.
High frequency protected.
15° Quick-Tilt™ table angle control.
Large digital LED display of speed on T-200.
Solid state speed controls.
25 lb and 200 lb load capacities.
T-25 turntableModel # AirCrafter T-25: 127-001 Table Diameter 5” Offset Load Capacity Horizontal - 0°
16 lb with Center of Gravity 1.78” off center Offset Load Capacity Vertical - 90°
10 lb with Center of Gravity 2.5” from plate Balanced Load Capacity Horizontal 25 lb Balanced Load Capacity Vertical 10 lb Table Tilt 0 ~ 90° RPM Range 0.25 ~ 10
AirCrafter™ T-200
Model # AirCrafter T-200: 127-005 Table Diameter 10” optional Offset Load Capacity Horizontal - 0°
200 lb with Center of Gravity 3.75” off center Offset Load Capacity Vertical - 90°
50 lb with Center of Gravity 5” from plate Balanced Load Capacity Horizontal 200 lb Balanced Load Capacity Vertical 50 lb Table Tilt 0 ~ 105° RPM Range Low: 0.3 ~ 2 High: 1.0 ~ 10
Optional accessories
AirCrafter™ T-200:
• Self-centering 3-Jaw Chuck (005-0040)
• 10” turntable kit (005-0048)
• Standard foot switch (005-0628)
• Heavy duty foot switch with variable speed control (005-0627)
